石墨烯包覆天然球形石墨作为锂离子电池的负极材料，是否需要乙炔黑导电剂？

我们通过包覆炭化的方法制备得到了石墨烯包覆的天然球形石墨(G/SG)材料,并使用扫描电子显微镜、X射线衍射仪以及多种电化学测试手段考察了不同石墨烯含量的复合材料的形貌结构及电化学性能。我们发现,在不添加乙炔黑(AB)的情况下,G/SG复合材料表现出较高的首次库伦效率,很好的循环稳定性和高倍率性能。当石墨烯包覆量为1%时,材料50次循环后的可逆容量可与添加10%AB的天然石墨电极(SG)等同;当石墨烯包覆量为2.5%时,材料的比容量完全高于添加10%AB的石墨电极。材料电化学性能的改善归因于石墨烯的包覆。一方面,石墨烯的柔软可变性可以保证天然石墨颗粒在充放电过程中的结构完整性,从而有效改善材料的循环稳定性;另一方面,石墨烯的存在提高了电极的导电性,促进更好导电网络的形成。因此,石墨烯包覆天然球形石墨材料中,石墨烯不仅是活性物质,也发挥导电剂的作用。当添加5%的乙炔黑时,在50 mA·g^-1电流循环50次后,5%G/SG电极的可逆容量从381.1 mAh·g^-1提高到404.5 mAh·g^-1,在1 A·g^-1电流时可逆容量从82.5 mAh·g^-1提高到101.9 mAh·g^-1,这表明G/SG电极仍然需要乙炔黑导电剂。乙炔黑颗粒填充在复合材料的空隙中,通过点接触的形式连接到G/SG颗粒,与石墨烯协同作用形成了更加有效的导电网络。尽管石墨烯包覆和乙炔黑添加对天然石墨电极具有积极的影响,例如增加了天然石墨电极的导电性和储锂性能(包括可逆容量,倍率性能和循环性能),但随着石墨烯或乙炔黑的增加,电极密度通常会降低。因此,在实际应用中应考虑石墨负极材料的质量和体积容量的平衡。这些结果对天然石墨的进一步商业应用具有重要意义。我们的工作为天然石墨电极在锂电池中的电化学行为提供了一种新的认识,并且有助于制备更高性能的负极材料。     

Graphene Nanocomposites Based Electrochemical Sensing Platform for Simultaneous Detection of Multi-drugs

Three reduced graphene oxide nanocomposites were employed to achieve the simultaneous electrochemical determination of multi-drugs including acetaminophen (ACTM), carbendazim (CB) and ciprofloxacin (CFX). All nanocomposite modified electrodes showed improved current responses for three drugs. Notably cauliflower-like platinum nanoparticles decorated reduced graphene oxide modified electrode (or Pt−RGO/GCE) exhibited the best performance in terms of electrochemical stability. Using Pt−RGO/GCE, the linear detect ranges of 30–120 μM, 25–115 μM and 10–25 μM, and detection limit values of 3.49, 2.96, and 1.53 μM were achieved for ACTM, CB and CFX respectively. The electrode was further used for the successful determination of above drugs in tap and river water using differential pulse voltammetry. From the obtained results, we believe that Pt-RGO/GCE is highly promising for the fabrication of robust electrochemical sensors for simultaneously determining ACTM, CB and CFX or similar types of drugs in the future.     

“Ghost peaks” of olmesartan medoxomil: Two solution degradation products of olmesartan medoxomil via oxidation mediated by metal ions

Two unknown solution degradants were found during the dissolution testing in 0.1-M HCl for olmesartan medoxomil (OLM) tablets. The structure of the degradants was identified and characterized by liquid chromatography–ultraviolet (LC–UV), liquid chromatography with tandem mass spectrometry (LC–MS/MS), and nuclear magnetic resonance (NMR) and demonstrated to be cyclization of tetrazole and benzene in the olmesartan (OL) and OLM structures. A series of studies including stress studies, simulation studies, and mechanism-based studies were performed to reveal the potential mechanisms that lead to the formation of the unknown degradants. The study results demonstrated that the degradation was catalyzed with radicals that originated from the metal ions leached from the inner surface of high-performance liquid chromatography (HPLC) glass vials with dissolved oxygen under acidic condition. Prerinsing the glass vials with acidic solution dissolved with EDTA can effectively avoid the generation of such oxidative impurities. The present work provides new insights into the understanding of degradation pathways of OLM, which might support the development of OLM tablets.     

Superhydrophobic surface based on micro/nano structured ZnO nanosheets for high-efficiency anticorrosion

Journal of Solid State Electrochemistry - There are two key factors in the fabrication of superhydrophobic surfaces. One is to have the appropriate micro/nano structure, and the other is to reduce...     

High-performance liquid chromatography quantitative analysis of ephedrine alkaloids in Ephedrae Herba on a perfluorooctyl stationary phase

Ephedrae Herba is one of the most commonly used herbal medicines, and it has been shown that most of the clinical efficacy for cold and asthma is exerted by its alkaloidal components. A simple and sensitive high-performance liquid chromatography method was developed using a perfluorooctyl column for the simultaneous determination of five alkaloids (norephedrine, norpseudoephedrine, ephedrine, pseudoephedrine, and methylephedrine) in Ephedrae Herba. The mobile phase comprising acetonitrile and 15 mM ammonium trifluoroacetate was used to elute the targets in isocratic elution mode. The method was validated for linearity (R² > 0.999), repeatability, intraday and interday precision, recoveries with trueness (93.87–110.99%), limits of detection (5.35–5.76 µg/mL), and limits of quantification (20 µg/mL). The quantitative results revealed that the developed method was precise and accurate. Then it was successfully applied to determine the difference in the contents of three batches of Ephedrae Herba from three pharmaceutical companies.     

Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

In the present study, we propose a novel method for the extraction of parabens in personal care products. A new, simple adsorptive material was obtained by combining metal-organic frameworks and melamine sponges using the adhesive property of polyvinylidene fluoride. This new material, metal-organic frameworks/melamine sponges, was found to be particularly suitable for solid-phase extraction. The structural characteristics of metal-organic frameworks/melamine sponges were first analyzed by scanning electron microscopy. Subsequently, solid-phase extraction was performed on sample solutions, and the extracted substances were then analyzed by high-performance liquid chromatography. Following optimization of important experimental conditions, excellent recovery rates were obtained. Our novel method was then applied to the extraction of four parabens (methylparahydroxybenzoates, ethylparahydroxybenzoates, propylparahydroxybenzoates, and butylparahydroxybenzoates) from real samples. The results yielded limits of detection of 0.26–0.41 ng/mL. The inter- and intra-day recoveries were 104.0–109.7% and 91.2–98.1%, respectively (relative standard deviation, <13.8%).     

还原-氧化协同降解全/多卤代有机污染物

全/多卤代有机污染物大多具有生态毒性、生物蓄积性、环境持久性及长距离迁移性,不仅危害环境与生态安全,而且可经食物链传递威胁人类健康。由于卤原子是吸电子基团且取代数目多,这类物质的最高占据分子轨道能较低,难于被氧化降解,相反较易被还原法脱卤降解。随卤原子取代数减少,脱卤产物难被进一步还原,而其毒性甚至高于母体污染物。注意到低卤代有机物更容易发生氧化降解,一些研究构建了还原-氧化接力降解体系,即先利用还原法将全/多卤代有机污染物还原为低卤代产物,再利用氧化法降解这些中间产物,从而实现深度/完全脱卤和矿化。本文根据催化反应类型对还原-氧化联用法进行了归纳,分类介绍了基于传统化学催化、光催化、电化学、光电化学及机械化学等构建还原-氧化协同降解体系的原理及应用,以期为开发高效的处置技术提供思路和建议。     

钴铁水滑石基材料在电催化析氧中的应用

析氧反应(OER)是电催化裂解水、二次金属-空气电池和可再生燃料电池等绿色可持续能源储存和转化技术中的关键步骤,但其较高的势垒和迟滞的动力学过程限制了反应的效率。因此,设计开发高效、稳定的非贵金属催化剂是新能源领域面临的挑战之一。钴铁水滑石(CoFe LDH)材料具有独特的二维层状结构、丰富多变的化学组成、高分散的金属阳离子、优异的稳定性和成本低廉等优点,在OER反应中有广泛的应用前景。但不良的导电性和有限的活性位点阻碍了CoFe LDH的工业化应用。本文首先介绍了CoFe LDH的结构并阐述了其OER反应机理,接着总结了CoFe LDH的制备工艺,并详细综述了近年来提升其 OER性能的改性策略:插层剥离、空位制造、材料复合、离子取代和衍生物等。最后讨论了水滑石材料现阶段存在的问题和未来在能源转化和利用领域的发展方向。     

A Unique Layered Cu-formate Hydrate of Cu(HCOO) 2·1/3H2O: Structures,Dehydration, and Thermal and Magnetic Properties

Anew layered Cu-formate hydrate of Cu(HCOO)₂·1/3H₂O is unique in its water content and the strongly waved (4,4) Cu-formate layers held by interlayer weak axial Cu-O_formate bonds and O-H_water···O_formate hydrogen bonds. The crystal is in orthorhombic space group Pbcn, with cell parameters at 80 K:a=7.9777(2) Å, b=7.3656(2) Å, c=21.0317(5) Å(1 Å=10⁻¹ nm), and V=1235.83(5) ų. The Cu²⁺ ions are in the environments of a square pyramid and elongated octahedron, in a ratio of 1/2 within the structure. In the layer, Cu²⁺ ions are connected by anti-anti formates via short basal Cu-O bonds. The structure remains unchanged until the dehydration that produces the layered anhydrous β-Cu(HCOO)₂, and the possible transformation mechanism, supported by diffraction evidence, is the reorganization of the Cu-O_formate bonds across the parent layers after dehydration. The two phases exhibit anisotropic thermal expansion behaviors closely relevant to the transverse thermal vibrations of the constituents. Cu(HCOO)₂·1/3H₂O is a 2-dimensional Heisenberg antiferromagnet, and exhibits a global spin-canted antiferromagnetism with the Néel temperature of 32.1 K. This is not only higher than that of the magnetically denser β-Cu(HCOO)₂, but also the highest among the copper formate frameworks.     

基于表面增强拉曼光谱技术的心肌生物标志物检测

心血管疾病(CVD)是全球最主要的死亡原因,急性心肌梗死(AMI)是心血管疾病致死的主要病因,安全快速地诊断AMI对于降低患者的死亡率至关重要。因常用的检测方法如心电图(ECG)缺乏足够的敏感性,寻找并针对AMI生物标志物开展高灵敏检测已成为早期检测AMI重要手段。心肌肌钙蛋白I(cTnI)、肌酸激酶同工酶(CK-MB)和肌红蛋白(Myo)是目前公认的检测AMI的重要心肌生物标志物。在过去的几十年里,许多生物传感器被开发出来用于检测心肌生物标志物,其中基于表面增强拉曼光谱(SERS)的心肌生物标志物检测技术迅速发展,并表现出独特的技术优势和广阔的应用前景。本文首先介绍了多种心肌生物标志物及其与AMI的关联,在此基础上概述主要的心肌生物标志物检测方法的原理、优势及局限性,重点介绍近年来新兴的SERS技术及其在心肌生物标志物传感方面的最新研究进展,并对该技术在AMI诊断方面的应用前景以及有待突破的瓶颈进行了讨论和展望。